PRICE: $19,500.00 CONDITION: CLEANED & TESTED YEAR OF MANUFACTURE: 2004
30-degree angle, hinged top platen, Radio Frequency Gluing Press is ideal for applications where versatility and productivity are a must.
CAPACITY: 36” wide by 60” long by 2” thick. SIDE PRESSURE: Applied by (10) 5” bore by 12” stroke air cylinders. System is provided with a filter and lubricator to ensure long cylinder life. A panel-mounted regulator provides precise pressure control. TOP PRESSURE: Applied by (3) 3 1/4” bore by 14” stroke air cylinders. System is provided with a filter and lubricator to ensure long cylinder life. GENERATOR: A built in 6 kW Radio Frequency generator will cure approximately 600 square inches of glue line per minute. CONTROL PANEL: Includes adjustable cycle timer, necessary meters, indicator lights, control pushbuttons and a two hand, no-tie-down control system for closing the press. SAFETY: An electronic eye prevents closing of the press in the event any objects are inserted from the front. All access doors are interlocked to prevent use of the generator in the event any are open. A safety switch is used to prevent the use of the generator when the press is in the open position
HAND POWERED IN-FEED TABLE: provides a convenient workspace for the operator to compose a panel while the press is closed. Pusher is guided by a Thompson lineal bearing.
ROSENQUIST, EB-800-H
Image:
Model: EB-800-H Serial Number: 801-1243-50 Year of Manufacture: 2001 Condition: Cleaned & Tested
Machine Description: A heavy duty Edge Gluer with a cure area of 48² x 96", equipped with a crowder infeed and a 30KW fabricated for the rapid cure of edge glued stock up to 4 1/2” in thickness.The package consists of an Edge Gluer [EG] design press with a chain driven crowder infeed. Edge clamping pressure is provided by hydraulic cylinders; top clamping pressure is provided by hydraulic cylinders acting upon the top platen.
Platen Area: 48" x 96" x 4 1/2" Thick Generator: 30 kW Side Pressure: Applied by 16 each 2" bore x 6" Stroke. Top Pressure: Applied by 2" Bore Hydraulic Cylinders. Pump Unit: 10 HP 15 GPM Powered in-feed Table and Out-feed Table.
ROSENQUIST EB-800-H (RECONDITIONED)
Image:
Model EB- 800H Condition: Rebuilt
Machine Description: A heavy duty Edge Gluer with a cure area of 48² x 102², equipped with a crowder infeed and a 20KW fabricated for the rapid cure of edge glued stock up to 4 1/2” in thickness.The package consists of an Edge Gluer [EG] design press with a chain driven crowder infeed. Edge clamping pressure is provided by hydraulic cylinders; top clamping pressure is provided by hydraulic cylinders acting upon the top platen. Press Specifications: A.The heavy welded steel frame is computer designed to minimize deflection and remain square under full working pressures over the full life of the press. B.Clamping Area is 48² x 102² x 4 1/2² thick. C.Edge pressure (102²) applied by (16) pusher shoes activated by 3” x 4” stroke hydraulic cylinders. D.Top pressure applied by (4) each 3" bore x 6” stroke hydraulic cylinders. E.The 20KW internal solid state RF Generator can cure approximately 2000 sq in of glue line area per minute. F.The generator features solid state rectification, state-of-the-art arc suppression and overload detection circuit designs, and an aluminum cabinet for maximum efficiency and performance. G.Two-hand no-tie-down operator controls for closing top platen, with safety jaw photoeye for operator safety. H.Controls include all required timers, meters, switches and push-buttons for full control of the press. I.Top platen operation and generator doors are all interlocked, ensuring that the platen is closed and the generator doors are closed prior to RF activation. J.Wired for 480 Volt 60 Cycle 3 Phase operation, 120VAC controls.Other voltages available please specify. K.Circuit breaker protection is provided.A service disconnect is required for safety, but is not provided.
System Price (reconditioned: FOB, North Carolina, USA
RFS Model 6072 Slant Press with 60" x 72" x 2-1/2" Cap., slant-bed, end loading with hinged top platen, 15 kW generator. Side pressure with (11) 4" stroke hydraulic cylinders, top pressure with (2) 12" stroke hydraulic cylinders, and end squaring device that hydraulically lowers to allow clear passline; end pressure with (9) 4" stroke hydraulic cylinders. Equipped with: 60" x 72" Infeed layup table, adjustable cycle timer, indicator lights, free standing push button control panel. Hydraulic pump with 5 HP motor, 15 GPM to operate all clamps. 480 Volt Three phase electrics
